Polymer-Modified Dry-Set Overlay Bonding Bed — The EZ Way to Resurface Concrete

Transform tired, cracked, or outdated concrete into a stunning new paver, stone, or porcelain hardscape without the mess, labor, or time of a traditional wet-set mortar bed — with SEK Surebond EZ Overlay Polymer-Modified Dry-Set Overlay Bonding Bed. This ready-to-use blend of polymer-modified sand and Portland cement installs dry, directly on top of existing concrete, to bond new paving units into place — saving hours of labor, cutting down jobsite mess, and delivering superior strength and durability every time.

Whether you're overlaying a cracked patio with modern porcelain pavers, resurfacing a pool deck with natural stone, or giving a dated concrete driveway a premium paver makeover, EZ Overlay is the fast, clean, pro-grade way to build stronger over sound existing concrete.

Why Pros Choose SEK Surebond EZ Overlay

Traditional wet-set mortar beds require mixing, hauling buckets of slurry, tight working windows, and extensive cleanup. EZ Overlay eliminates all of that with dry-set technology — no mixing required. Just pour it, screed it, set your pavers, and activate it. The polymer-modified formula delivers superior bond strength and freeze-thaw durability, while the sand and Portland cement blend locks your paving units in place for long-term hardscape performance. It's the smarter, faster, cleaner way to overlay existing concrete.

Key Features & Benefits

• Dry-set technology — no mixing required, no wet bed hassle
• Ready-to-use formula — pour it straight from the bag, no on-site prep
• Polymer-modified for superior strength — reinforced bond for long-term performance
• Installs directly over sound existing concrete — skip demolition
• Saves time & labor — dramatically faster than traditional wet-bed systems
• Less mess — cleaner jobsite, easier cleanup
• Versatile paving unit compatibility — works with pavers, natural stone, or porcelain
• Levels uneven surfaces — install depth ranges from ¼" up to 2" to correct low spots
• Supports light-duty residential vehicular traffic — driveway-rated for residential use
• Residential & commercial overlay applications
• Part of SEK Surebond's EZ Way System — engineered for modern hardscape performance

Ideal For These Overlay Projects

• Walkways & garden paths
• Patios & outdoor living spaces
• Pool decks & pool surrounds
• Courtyards & plazas
• Driveways with light-duty residential vehicular traffic
• Covered porches and entryways
• Resurfacing projects over sound existing concrete
• Concrete restoration and modernization

Bonds These Paving Materials

• Concrete pavers (standard and large-format)
• Natural stone (bluestone, travertine, flagstone, granite)
• Porcelain pavers & exterior-rated porcelain tile
• Manufactured stone paving units

Product Specifications

• Manufacturer: SEK Surebond
• Product: EZ Overlay Polymer-Modified Dry-Set Overlay Bonding Bed
• Type: Polymer-modified sand and Portland cement blend
• Installation: Dry-set (no mixing required)
• Installation Depth: ¼" to 2"
• Maximum Depth Variance: ¾"
• Application Temperature: 35°F or higher during installation and for 48 hours after
• Traffic Rating: Residential & commercial overlays, including light-duty residential vehicular traffic
• Substrate: Sound existing concrete (good condition) or EZ Set permeable base
• Use: Exterior

Quick Application Overview

1. Confirm the existing concrete substrate is sound and in good condition — no major cracking, spalling, or structural failure.
2. Clean the concrete surface of all loose debris, dirt, and contaminants.
3. Plan your paving unit layout to avoid covering full-depth expansion joints — paving units should not bridge or cover expansion joints.
4. Pour EZ Overlay directly onto the concrete substrate — no mixing required.
5. Screed the EZ Overlay to the desired depth (¼" to 2"). Use EZ Overlay to level low spots; do not exceed ¾" depth variance in any one area.
6. Set paving units into the dry EZ Overlay, pressing firmly to achieve full contact and level alignment.
7. Check level, alignment, and joint spacing as you go.
8. Activate EZ Overlay per the manufacturer's directions.
9. Follow the SEK Surebond technical data sheet (TDS) for activation, cure times, and joint finishing.
10. Finish joints with HydroSweep or PolySweep polymeric sand as recommended.

Important Notes

• Exterior use only for overlay applications
• Existing concrete substrate must be in good condition — structurally sound and free from major cracking
• Installation depth: ¼" to 2", with maximum ¾" depth variance
• Optimal installation and curing air temperature is above 35°F during installation and for 48 hours afterward
• Do not install in rain — turn off nearby irrigation systems during and after installation
• Plan layout carefully — paving units must not cover full-depth expansion joints
• Rated for residential & commercial overlay use, including light-duty residential vehicular traffic — not recommended for commercial vehicle usage
• Portland cement can cause serious caustic burns — wear appropriate PPE (gloves, eye protection, respirator, and skin protection)
• Always follow the current SEK Surebond technical data sheet for complete installation and safety instructions
• Store in a dry, covered location

Frequently Asked Questions

What is EZ Overlay used for?
EZ Overlay is a dry-set, polymer-modified sand and Portland cement blend used to bond new paving units — pavers, stone, or porcelain — directly on top of existing sound concrete. It's designed for overlay projects where you want to resurface concrete without demolition.

Do I need to mix EZ Overlay?
No. EZ Overlay is ready-to-use and installs dry. No mixing buckets, no wheelbarrows of slurry, no wet mess — just pour, screed, set pavers, and activate per the manufacturer's directions.

What's the difference between EZ Overlay and EZ Bond?
EZ Overlay is a dry-set overlay system that installs directly on top of existing concrete — the fastest and cleanest way to resurface sound concrete. EZ Bond is a wet-set polymer-modified bonding mortar designed to bond large-format pavers to the EZ Set Trass Setting Bed or sound concrete. Choose based on whether you prefer dry-set or wet-set installation.

How thick can I install EZ Overlay?
Installation depth ranges from ¼" up to 2" to level uneven surfaces or correct low spots. Maximum depth variance in any one area should not exceed ¾".

Can I use EZ Overlay on a driveway?
Yes — EZ Overlay supports light-duty residential vehicular traffic. It's rated for residential and commercial overlay applications, but not for commercial vehicular use.

Does the existing concrete need to be perfect?
The existing concrete substrate must be in good condition — structurally sound and free from major cracking, heaving, or failure. EZ Overlay can level minor surface variations but is not a solution for substrate repair.

Can I overlay full-depth expansion joints?
No — paving units should NOT be installed over full-depth expansion joints. Plan your layout so expansion joints remain open and functional through the overlay.

What temperature do I need to install at?
Optimal air temperature is above 35°F during installation and for 48 hours afterward. Do not install in rain or with active irrigation nearby.

What paving units can I use?
EZ Overlay bonds concrete pavers, natural stone, and porcelain pavers or tile. It's ideal for modern overlay projects using any of these materials.

Skip the mess. Skip the mixing. Skip the wet bed. Order SEK Surebond EZ Overlay today and overlay existing concrete the EZ Way.