🎉 Up to 70% Off Selected ItemsShop Sale
\n
\n\n\nWhat Is Alliance Gator Dust Bond Polymeric Stone Dust?
\n\nImportant. read before ordering: Gator Dust Bond is for wet cast and natural stone only on a traditional base. It cannot be used on concrete pavers, over concrete slabs, or in areas with vehicular traffic. It requires a minimum temperature of 59°F and no rain for 24 hours before and after installation. If you have concrete pavers or need vehicular-rated jointing, see our polymeric sand products instead.\n
\nAlliance Gator Dust Bond is the polymeric stone dust jointing material. a fundamentally different product from polymeric sand. Instead of calibrated sand, it is made from calibrated stone dust mixed with polymer binders. Alliance Gator Dust Bond polymeric stone dust fills and locks wide joints from 1/2 inch to 6 inches, making it the right choice for natural stone and wet cast stone projects where joint widths vary widely or exceed what any polymeric sand can handle.
\nOnce activated with water, Alliance Gator Dust Bond polymeric stone dust sets very firm between the stone joints while retaining enough flexibility to handle freeze thaw cycles without cracking. Alliance Gator Dust Bond continues to harden over time, getting stronger with age. Available in Sahara Beige and Stone Grey.
\n\nNot sure if Gator Dust Bond is right for your project? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right product for your stone type, joint width, and project conditions.
\n\n\n\n
\n\n![\"Alliance](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/GatorDust_SaharaBeige.jpg?v=1712420753\")
\n
\n\nSahara Beige
\n\n![\"Alliance](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/GatorDust_STONEGREY.jpg?v=1712420730\")
\n
\n\nStone Grey
\n\n
\n\n\nIs Alliance Gator Dust Bond the Right Jointing Material for Your Project?
\n\n\nGator Dust Bond is NOT for concrete pavers, vehicular areas, or overlay installations. It is for wet cast and natural stone on a traditional base, pedestrian use only. If you have concrete pavers, shop our polymeric sand products.\n
\n\n\n
\n\n\nNatural stone patios and walkways The ideal choice for flagstone, slate, bluestone, granite, and other natural stones with variable joint widths from 1/2 inch to 6 inches on a traditional base. Pedestrian use only.
\n\n
\n\n\nWet cast stone patios and walkways Works with wet cast stepping stones and wet cast stone slabs on a traditional base system. Pedestrian use only.
\n\n
\n\n\nPool decks and pool surrounds Recommended for natural and wet cast stone pool installations on a traditional base. A slope of 1/8 inch per linear foot away from the pool is mandatory. Pool coping joints must use mortar. Gator Dust Bond is for the surrounding stone field only.
\n\n
\n\n\nWide joints from 1/2 inch to 6 inches The only Alliance jointing product that handles joints this wide. Regular polymeric sands top out at 1 to 4 inches. Gator Dust Bond fills the wide, irregular gaps common with natural stone.
\n\n
\n\n\nGator Base installations Compatible with installations using Gator Base as the base system in place of traditional crushed stone and bedding sand.
\n\n
\n\n\nNot for concrete pavers, driveways, or vehicular use Gator Dust Bond is pedestrian use only. Do not use where vehicles will travel. For concrete paver driveways or vehicular applications, see our polymeric sand products.
\n\nNot sure which product you need? Have concrete pavers? Shop our polymeric sand products. Need vehicular-rated jointing? Shop Maxx G2. Still unsure? Call or text us 24/7 at (856) 418-4895.\n
\n\n![\"Alliance](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/gator-dust-bond-polymeric-stone-dust-infographic.png?v=1776988707\")
\n
\n\n\n\nWhat Makes Alliance Gator Dust Bond Different from Regular Stone Dust?
\n\n
\n\nPolymer binder formula locks stone dust into the joint Regular stone dust has no binding agent and washes out after rain. Alliance Gator Dust Bond's polymer binders permanently lock the stone dust in place once activated with water, creating a firm, durable joint that regular dust cannot match.
\n\n
\n\nHandles wide joints from 1/2 inch to 6 inches The widest joint range of any Alliance jointing product. Perfect for the irregular, wide gaps common in natural stone, flagstone, and wet cast stone installations where polymeric sands cannot reach.
\n\n
\n\nDoes not haze stones The Alliance Gator Dust Bond formula is specifically designed so it does not leave white residue or haze on the stone surface when applied correctly to completely dry stones.
\n\n
\n\nContinues to harden over time Unlike polymeric sands that reach their final cure relatively quickly, Alliance Gator Dust Bond continues to strengthen and harden over time, getting more durable as it ages.
\n\n
\n\nFirm yet flexible cure Sets very firm and locks the stones securely while retaining enough flexibility to expand and contract with seasonal freeze thaw cycles without cracking out of the joint.
\n\n
\n\nWaterproof bag packaging Store bags lying flat with the front facing up. Sealed intact bags and intact pallets can be safely stored outdoors until needed.
\n\nNote: A leaf blower is required to remove surface excess after sweeping and before watering. Have one ready on the job site before you start. Also avoid excessive watering or flooding of the stone area during activation.
\n\n
\n\n\nWhat Alliance Gator Dust Bond Polymeric Stone Dust Helps Prevent
\nA properly installed Gator Dust Bond joint is your best long term protection against the most common natural and wet cast stone maintenance problems. Here is what it keeps out:
\n\n
\n\nWeeds growing through stone joints Polymer-locked joints leave no loose material for weed seeds to take root, making weed growth through the joints rare with a properly installed application.
\n\n
\n\nInsect damage and ant tunneling Ants and insects cannot tunnel through a properly cured Gator Dust Bond joint, protecting the base material from destabilization over time.
\n\n
\n\nJoint erosion from rain, wind, and freeze thaw cycles Regular stone dust washes out easily. Alliance Gator Dust Bond's polymer bond holds the jointing material firmly in the joint against rain, wind, and the expansion and contraction of freeze thaw cycles.
\n\n
\n\nStone shifting and movement Firmly locked joints keep natural and wet cast stones stable under foot traffic throughout the seasons, reducing stone shifting and the need for re-leveling.
\n\n
\n\nHaze residue on stone faces When applied correctly to completely dry stones, the haze free formula does not leave white residue on the stone surface after application.
\nNote: Gator Dust Bond does not prevent moss, mold, or mildew. Those result from shade, moisture retention, and drainage conditions on site. All stone surfaces must have adequate drainage slope for Gator Dust Bond to perform at its best. Treat moss or mildew with a paver-safe cleaner and improve drainage to address underlying conditions.
\n\n![\"Gator](\"https://cdn.shopify.com/s/files/1/0868/5161/7060/files/ChatGPT_Image_Apr_14_2026_04_42_04_PM.png?v=1776199353\")
\n
\n\n\nAlliance Gator Dust Bond Polymeric Stone Dust Available Colors
\nGator Dust Bond is available in two colors: Sahara Beige and Stone Grey. Note that the color names are different from our polymeric sand products. these are calibrated stone dust colors designed to complement natural and wet cast stone. What you see on a screen looks different on your actual stones in real outdoor light. We strongly recommend ordering physical color samples before purchasing full bags.
\n\n\n\n
\n\nNot sure which color matches your stone?Order our sample pack with both colors shipped to you. Test them on your actual stones in real outdoor light before purchasing full bags. The right color choice makes a significant difference in the finished look of your project.\n
\nOrder Color Samples\n\n\n
\n
\n\n\nHow Many Bags of Alliance Gator Dust Bond Polymeric Stone Dust Do You Need?
\nAlliance Gator Dust Bond coverage varies significantly because joint widths on natural and wet cast stone projects vary so widely. A project with tight 1/2 inch joints will use far fewer bags than one with wide 4 to 6 inch joints. Always order 15 to 20 percent extra on natural stone projects where joint widths are irregular and hard to predict.
\n\n\n
\n\nApproximate coverage per 50 lb bag. both colors
\n\n\nUp to 30 ft²\n
\n\n\nUp to 30 ft²\n
\n| Color | \nApproximate coverage per 50 lb bag | \n
|---|---|
| Sahara Beige | \nUp to 30 sq ft | \n
| Stone Grey | \nUp to 30 sq ft | \n
Coverage depends heavily on joint width, joint depth, and stone size. Natural stone projects with variable joint widths are especially hard to estimate accurately. Always order 15 to 20 percent extra. Source: Alliance Gator official TDS. Always verify the latest TDS at AllianceGator.com before installation.
\nCall Us to Help Estimate Your Bag Count. (856) 418-4895\n\n
\n\n\nHow to Install Alliance Gator Dust Bond Polymeric Stone Dust
\nAlways refer to the latest Alliance Gator Dust Bond Technical Data Sheet (TDS) before installing. Installation steps differ for natural stone versus wet cast stone.
\n\n\nCritical conditions. do not install if any of these apply: temperature is below 59°F (15°C), rain is forecasted within the next 24 hours, or stone surfaces or joints are damp or wet in any way.
\n\n\n
\n\n1
\n\n
\nPrepare the base and install stones
\nInstall stones on a traditional base system: a maximum of 1 inch (25 mm) of bedding sand on top of a minimum of 6 inches (15 cm) of crushed stone compacted at 98 percent Proctor density. Adding a second 1 inch layer of loose sand on top of a Gator Base is also accepted. Make sure all stone surfaces and joints are completely dry before proceeding.
\n\n
\n\n2
\n\n
\nApply Gator Dust Bond into the joints
\nFor natural stone: use a hard bristle broom to sweep Gator Dust Bond into the full depth of the joints in multiple directions. For wet cast stone: use a scoop to carefully pour Gator Dust Bond directly into the full depth of the joints. Avoid getting product on the wet cast stone surface when possible. Do not mix with other materials in the joints.
\n\n
\n\n3
\n\n
\nTamp with rubber mallet to settle joints
\nHit each stone with a rubber mallet to make Alliance Gator Dust Bond settle firmly into the joints by removing air pockets. Repeat steps 2 and 3 at least two more times to ensure joints are fully packed and consolidated to the required depth.
\n\n
\n\n4
\n\n
\nSweep off excess then use a leaf blower
\nUse a soft, fine bristle broom to sweep all excess Gator Dust Bond off the stone surfaces. Then use a leaf blower to remove all remaining residue from the stone faces before watering. This step is required and must be completed before water activation.
\n\n
\n\n5
\n\n
\nActivate with water. shower setting only
\nSet your hose nozzle to the shower setting. Water the entire installation gently and evenly. Do not over water or allow flooding. Avoid excessive watering of the stone area. The goal is to activate the polymer binders without washing product out of the joints.
\nPool surrounds: a slope of 1/8 inch per linear foot away from the pool is mandatory before installing. Start watering at the lowest point and work upward.
\n\n
\n\n6
\n\n
\nKeep off surface for 24 hours
\nMinimize or avoid walking on the stones for 24 hours after installation. No rain can occur within 24 hours of activation. Gator Dust Bond will continue to harden and strengthen over time. the joints get more durable as they age.
\n\n
\nDo not apply if any of these conditions exist
\nTemperature is below 59°F (15°C)
\nRain is forecasted within the next 24 hours
\nStone surfaces or joints are damp or wet in any way
\nStones are installed over a concrete slab. Gator Dust Bond cannot be used on overlays
\nProject requires vehicular traffic. Gator Dust Bond is pedestrian use only
\nJoint width is under 1/2 inch or over 6 inches
\nInstallation is on asphalt. do not sweep Gator Dust Bond over asphalt
\nAlways refer to the manufacturer's TDS before installing: Alliance Gator Dust Bond Technical Data Sheet at AllianceGator.com\n
\n\n
\n\n\nLong Term Maintenance for Alliance Gator Dust Bond Stone Joints
\nAlliance Gator Dust Bond polymeric stone dust is lower maintenance than regular stone dust, but it is not completely maintenance free. Here is what to do to keep your stone joints in top condition.
\n\n
\n\nRoutine cleaning Apply Gator Shampoo or a stone-safe cleaner to the full surface including the joints. Rinse with a garden hose on the shower setting at standard residential water pressure, typically up to 80 psi. Avoid flooding the joint area and do not use excessive water pressure directly on the joints.
\n\n
\n\nHaze on stones after installation Usually caused by applying on surfaces that were not completely dry, or from insufficient leaf blowing before watering. Treat with Gator Efflorescence Cleaner. Natural haze from installation also fades over time with sun and weather exposure.
\n\n
\n\nMoss, mold, or mildew These are drainage and shade issues, not a product problem. Treat with a stone-safe cleaner. For long term prevention, improve drainage and reduce shade. All stone surfaces must maintain adequate drainage slope for the product to perform correctly.
\n\n
\n\nRe-filling worn or damaged joints Remove all old jointing material completely before re applying. Do not apply new Alliance Gator Dust Bond on top of old jointing material. Stones must be fully dry and conditions must meet temperature and rain requirements. Then follow the standard installation steps from the beginning.
\n\n
\n\nStoring leftover bags Alliance Gator Dust Bond comes in waterproof bags. Lay bags flat with the front facing up. Sealed intact bags and intact pallets can be safely stored outdoors until needed.
\n\n
\n\n\nTechnical Specifications. Alliance Gator Dust Bond
\n\nProduct typePolymeric stone dust (not polymeric sand)\n
\n\nCompatible surfacesWet cast stone, natural stone only\n
\n\nOverlay (concrete slab) applicationsNot compatible\n
\n\nVehicular trafficNot approved. pedestrian use only\n
\n\nMinimum joint width1/2 inch (1.25 cm)\n
\n\nMaximum joint width6 inches (15 cm)\n
\n\nMinimum install temperatureAbove 59°F (15°C)\n
\n\nRain requirementNo rain forecasted within 24 hours\n
\n\nKeep off surface after installation24 hours minimum\n
\n\nCuring behaviorContinues to harden over time\n
\n\nLeaf blower requiredYes. required before water activation\n
\n\nCoverage per 50 lb bagUp to 30 sq ft (varies by joint width)\n
\n\nColors availableSahara Beige, Stone Grey\n
\n\nBag weight50 lbs (22.7 kg)\n
\n\nBag packagingWaterproof bag, store flat, outdoor safe\n
\n\nManufacturerAlliance Designer Products Inc.\n
\nAll specifications sourced from the official Alliance Gator Technical Data Sheet (TDS). Always verify the latest TDS at AllianceGator.com before installation. Specifications are subject to change by the manufacturer.
\n\n\n\n
\n\n\nManufacturer Technical Data Sheet. Gator Dust Bond
\nOfficial document published by Alliance Designer Products Inc. Contains installation diagrams, coverage charts, chemical specifications, and full product details.
\nalliancegator.com. Opens in new tab
\n\n
\n\n\nWhy Buy Alliance Gator Dust Bond from Polymeric Sand Store?
\nAlliance makes excellent products. We carry them because we believe in them. Here is what you get when you order from Polymeric Sand Store that you will not find at a big box store or on Amazon.
\n\n
\n\nSame-day shipping on every order Order before 2 PM Eastern time and your order ships today. We ship to the continental United States every day.
\n\n
\n\nReal expert advice available 24 hours a day, 7 days a week Call or text (856) 418-4895 any time. Tell us your stone type, joint width, and project details and we will confirm whether Gator Dust Bond is the right choice.
\n\n
\n\nPhysical color samples before you commit We offer Sahara Beige and Stone Grey as physical sample bags shipped directly to you. Test them against your actual stones before purchasing full bags.
\n\n
\n\nMulti-brand expert selection We carry Alliance, Techniseal, Rhino, SEK, and more. We will give you an honest recommendation for your project, even if the right answer is a different product entirely.
\n\n
\n\n30-day satisfaction guarantee If something is wrong with your order, contact us within 30 days and we will make it right. We accept returns on items that are unopened, unused, and in their original packaging. You can return the product for a full refund, or contact us for a pre-paid return label which will be deducted from your refund.
\n\n
\n\n\nFrequently Asked Questions. Gator Dust Bond
\n\n\n
\n\nStandard polymeric sand is made from calibrated sand mixed with polymer binders and is designed for concrete pavers in joints up to 4 inches. Alliance Gator Dust Bond is made from calibrated stone dust mixed with polymer binders and is designed specifically for wet cast and natural stone with joints from 1/2 inch to 6 inches wide. Gator Dust Bond cannot be used on concrete pavers, on overlays, or in vehicular areas. If you have concrete pavers, you need one of our polymeric sand products. Call us at (856) 418-4895 if you are not sure which product fits your project.
\n\n
\n\nNo. Alliance Gator Dust Bond is rated for pedestrian use only and cannot handle vehicular loads. Do not use it on driveways, parking areas, or any surface that vehicles will travel on. For vehicular-rated polymeric sand, see our Gator Maxx G2 or Gator Maxx Sand listings.
\n\n
\n\nNo. Unlike the G2-formula polymeric sands which become rain safe in 15 minutes, Gator Dust Bond requires no rain for the full 24 hours following installation. Do not install if rain is forecasted at any point in the next 24 hours. Check the forecast carefully before starting your project.
\n\n
\n\nGator Dust Bond must be installed above 59°F (15°C). This is a higher minimum temperature than our polymeric sand products, which can be installed above 32°F. Do not install on cold days or during spring and fall when temperatures can drop below 59°F unexpectedly.
\n\n
\n\nYes. A leaf blower is required to remove all remaining Alliance Gator Dust Bond surface residue from the stone faces before water activation. Make sure you have one on site before you start. This step is required and cannot be skipped.
\n\n
\n\nAlliance Gator Dust Bond coverage is approximately up to 30 square feet per bag depending on joint width and depth. Natural stone projects with wide or variable joints will use significantly more product than projects with consistent narrow joints. Always order 15 to 20 percent extra on natural stone projects. Use our polymeric sand calculator for an estimate, or call us at (856) 418-4895 and we will help you calculate your order.
\n\n
\n\nNo. Alliance Gator Dust Bond polymeric stone dust is for traditional base installations only. It cannot be used on overlay applications over concrete slabs. For overlay-compatible products, see Gator Maxx G2 or Gator Maxx Sand.
\n\n
\nOrders placed before 2 PM Eastern time ship the same day. We keep Gator Dust Bond in both Sahara Beige and Stone Grey in stock and ship to homeowners and contractors across the continental United States. For questions about your order, call or text us at (856) 418-4895.
\n\n
\n\n","image":["/images/getpolymericsandstore.shop/images/product/alliance-gator-dust-bond-polymeric-stone-dust-1.jpg","/images/getpolymericsandstore.shop/images/product/alliance-gator-dust-bond-polymeric-stone-dust-2.jpg","/images/getpolymericsandstore.shop/images/product/alliance-gator-dust-bond-polymeric-stone-dust-3.jpg","/images/getpolymericsandstore.shop/images/product/alliance-gator-dust-bond-polymeric-stone-dust-4.png"],"sku":"alliance-gator-dust-bond-polymeric-stone-dust","brand":{"@type":"Brand","name":"Polymeric Sand Store"},"offers":{"@type":"AggregateOffer","lowPrice":87.99,"highPrice":87.99,"priceCurrency":"USD","availability":"https://schema.org/InStock","url":"https://getpolymericsandstore.shop/products/alliance-gator-dust-bond-polymeric-stone-dust","offerCount":2}}\n
\nQuestions About Alliance Gator Dust Bond Polymeric Stone Dust?
\nCall or text us 24/7 at (856) 418-4895. We will confirm whether Gator Dust Bond is right for your stone type and joint width, how many bags you need, and what conditions to watch for. Orders placed before 2 PM Eastern time ship the same day. Both colors are in stock.
\n\nCoverage Calculator\nTalk to an Expert\n
\nAlliance Gator Dust Bond Polymeric Stone Dust for Joints up to 6"
1/2" – 6"
Joint width range
2 colors
Available
What Is Alliance Gator Dust Bond Polymeric Stone Dust?
Important. read before ordering: Gator Dust Bond is for wet cast and natural stone only on a traditional base. It cannot be used on concrete pavers, over concrete slabs, or in areas with vehicular traffic. It requires a minimum temperature of 59°F and no rain for 24 hours before and after installation. If you have concrete pavers or need vehicular-rated jointing, see our polymeric sand products instead.
Alliance Gator Dust Bond is the polymeric stone dust jointing material. a fundamentally different product from polymeric sand. Instead of calibrated sand, it is made from calibrated stone dust mixed with polymer binders. Alliance Gator Dust Bond polymeric stone dust fills and locks wide joints from 1/2 inch to 6 inches, making it the right choice for natural stone and wet cast stone projects where joint widths vary widely or exceed what any polymeric sand can handle.
Once activated with water, Alliance Gator Dust Bond polymeric stone dust sets very firm between the stone joints while retaining enough flexibility to handle freeze thaw cycles without cracking. Alliance Gator Dust Bond continues to harden over time, getting stronger with age. Available in Sahara Beige and Stone Grey.
Not sure if Gator Dust Bond is right for your project? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right product for your stone type, joint width, and project conditions.
Sahara Beige
Stone Grey
Questions About Alliance Gator Dust Bond Polymeric Stone Dust?
Call or text us 24/7 at (856) 418-4895. We will confirm whether Gator Dust Bond is right for your stone type and joint width, how many bags you need, and what conditions to watch for. Orders placed before 2 PM Eastern time ship the same day. Both colors are in stock.
Coverage Calculator
Talk to an Expert
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Alliance Gator Dust Bond Polymeric Stone Dust for Joints up to 6"
Alliance Gator Dust Bond Polymeric Stone Dust for Joints up to 6"
1/2" – 6"
Joint width range
2 colors
Available
What Is Alliance Gator Dust Bond Polymeric Stone Dust?
Important. read before ordering: Gator Dust Bond is for wet cast and natural stone only on a traditional base. It cannot be used on concrete pavers, over concrete slabs, or in areas with vehicular traffic. It requires a minimum temperature of 59°F and no rain for 24 hours before and after installation. If you have concrete pavers or need vehicular-rated jointing, see our polymeric sand products instead.
Alliance Gator Dust Bond is the polymeric stone dust jointing material. a fundamentally different product from polymeric sand. Instead of calibrated sand, it is made from calibrated stone dust mixed with polymer binders. Alliance Gator Dust Bond polymeric stone dust fills and locks wide joints from 1/2 inch to 6 inches, making it the right choice for natural stone and wet cast stone projects where joint widths vary widely or exceed what any polymeric sand can handle.
Once activated with water, Alliance Gator Dust Bond polymeric stone dust sets very firm between the stone joints while retaining enough flexibility to handle freeze thaw cycles without cracking. Alliance Gator Dust Bond continues to harden over time, getting stronger with age. Available in Sahara Beige and Stone Grey.
Not sure if Gator Dust Bond is right for your project? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right product for your stone type, joint width, and project conditions.
Sahara Beige
Stone Grey
Questions About Alliance Gator Dust Bond Polymeric Stone Dust?
Call or text us 24/7 at (856) 418-4895. We will confirm whether Gator Dust Bond is right for your stone type and joint width, how many bags you need, and what conditions to watch for. Orders placed before 2 PM Eastern time ship the same day. Both colors are in stock.
Coverage Calculator
Talk to an Expert
Select Size
Select Color
From $87.99
Alliance Gator Dust Bond Polymeric Stone Dust for Joints up to 6"—
$87.99
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
1/2" – 6"
Joint width range
2 colors
Available
What Is Alliance Gator Dust Bond Polymeric Stone Dust?
Important. read before ordering: Gator Dust Bond is for wet cast and natural stone only on a traditional base. It cannot be used on concrete pavers, over concrete slabs, or in areas with vehicular traffic. It requires a minimum temperature of 59°F and no rain for 24 hours before and after installation. If you have concrete pavers or need vehicular-rated jointing, see our polymeric sand products instead.
Alliance Gator Dust Bond is the polymeric stone dust jointing material. a fundamentally different product from polymeric sand. Instead of calibrated sand, it is made from calibrated stone dust mixed with polymer binders. Alliance Gator Dust Bond polymeric stone dust fills and locks wide joints from 1/2 inch to 6 inches, making it the right choice for natural stone and wet cast stone projects where joint widths vary widely or exceed what any polymeric sand can handle.
Once activated with water, Alliance Gator Dust Bond polymeric stone dust sets very firm between the stone joints while retaining enough flexibility to handle freeze thaw cycles without cracking. Alliance Gator Dust Bond continues to harden over time, getting stronger with age. Available in Sahara Beige and Stone Grey.
Not sure if Gator Dust Bond is right for your project? Call or text us 24/7 at (856) 418-4895 and we will help you choose the right product for your stone type, joint width, and project conditions.
Sahara Beige
Stone Grey
Questions About Alliance Gator Dust Bond Polymeric Stone Dust?
Call or text us 24/7 at (856) 418-4895. We will confirm whether Gator Dust Bond is right for your stone type and joint width, how many bags you need, and what conditions to watch for. Orders placed before 2 PM Eastern time ship the same day. Both colors are in stock.
Coverage Calculator
Talk to an Expert
