SEK Surebond – SB-9000 Wet Look Solvent Based Sealer- Gallon
Premium Wet-Look Gloss Sealer for Pavers, Stamped Concrete & Natural Stone
Bring tired pavers back to life and lock in that rich, just-rained-on look with SEK Surebond SB-9000 Wet Look Solvent-Based Sealer — a premium, high-solids acrylic paver sealer engineered to deeply enhance surface color, deliver a glossy wet-look finish, and protect your hardscape from the elements for years. This 1-gallon container is the go-to sealer for hardscape contractors and homeowners who want professional results, maximum color enhancement, and long-term surface protection.
Whether you're sealing a brand-new paver patio, restoring the elegance of a weathered driveway, or protecting a stamped concrete pool deck, SB-9000 transforms the surface with a luxurious wet sheen while creating a durable barrier against salt, stains, UV, and weathering.
Why Pros Choose SEK Surebond SB-9000
Cheap sealers yellow in the sun, trap moisture, and peel within a season. SB-9000 is engineered differently — a high-solids solvent-based acrylic co-polymer formula that stays clear, resists UV yellowing, and remains breathable so naturally occurring moisture and efflorescence can escape rather than becoming trapped beneath the film. That means a deeper color boost, a longer-lasting finish, and a sealer you can apply immediately after paver installation without fear of cloudy hazing.
Key Features & Benefits
- Rich wet-look gloss finish — deeply enhances paver and stone color
- Solvent-based high-solids acrylic — premium professional formulation
- Non-yellowing — UV-resistant, stays clear under sunlight
- Breathable — won't trap moisture or efflorescence beneath the film
- Can be applied immediately after installation — no long wait times on new pavers
- Stain resistant — makes cleaning and maintenance easier
- Resists salt, mild acid, and alkali — stands up to corrosive chemicals
- Mold & mildew resistant
- Freeze resistant to -60°F and stable up to 180°F once cured
- Restores old, tired pavers to their original rich appearance
- Works on horizontal and vertical surfaces — patios, walls, columns, and more
Ideal Surfaces
- Concrete pavers & interlocking concrete pavers
- Clay pavers
- Flat concrete & stamped concrete
- Exposed aggregate
- Stucco, concrete walls & retaining walls
- Limestone, sandstone & natural paving stones
- Masonry surfaces
Perfect For These Applications
Paver patios, paver driveways, paver walkways, pool decks and pool surrounds, stamped concrete patios, outdoor kitchens, courtyards, garden paths, retaining walls, column cladding, commercial hardscape installations, and any outdoor concrete, masonry, or natural stone surface where a rich wet-look finish is desired.
Product Specifications
- Manufacturer: SEK Surebond
- Product: SB-9000 Wet Look Sealer
- Type: Solvent-based high-solids acrylic co-polymer
- Finish: Wet look, gloss / semi-gloss
- Size: 1 Gallon
- Application: Spray & backroll (2-coat system recommended)
- Coverage: Approx. 100–200 sq. ft. per gallon (varies by surface porosity)
- Use: Exterior only
- Temperature Tolerance (cured): -60°F to 180°F
Quick Application Overview
- Clean and fully dry the surface — remove all dirt, efflorescence, and contaminants (HD Paver Prep recommended for best results).
- Ensure joint sand is dry and fully swept into place if using polymeric or stabilizing sand.
- Protect surrounding landscaping, grass, plants, and metal fixtures.
- Apply the first coat evenly using the spray & backroll method.
- Allow the first coat to dry per manufacturer instructions.
- Apply a second coat for maximum wet-look enhancement and protection.
- Allow sealer to fully cure before foot or vehicle traffic.
Important Notes
- Outdoor use only — not for interior application
- Always test first on a small, inconspicuous area to confirm appearance and compatibility
- Pavers and joint sand must be completely dry before sealing — trapped moisture causes hazing
- Due to the natural variability of stone and clay products, long-term performance may vary
- Wear appropriate PPE — gloves, eye protection, and a respirator rated for solvents
- Keep away from flames and sparks — solvent-based product
Frequently Asked Questions
Will SB-9000 yellow in the sun?
No. SB-9000 is engineered with UV-resistant, non-yellowing acrylic co-polymers specifically to maintain clarity under sun exposure.
Can I apply it to newly installed pavers?
Yes. Because SB-9000 is breathable, it can be applied immediately after installation without trapping naturally occurring moisture or efflorescence.
How much area does 1 gallon cover?
Approximately 100–200 sq. ft. per gallon depending on surface porosity and number of coats. Porous or textured surfaces absorb more product.
One coat or two?
SB-9000 can be applied as a one-coat system, but a two-coat application is recommended for maximum wet-look enhancement, gloss, and protection.
Does it work on natural stone?
Yes — SB-9000 is compatible with limestone, sandstone, and natural paving stones. Always test a small area first, as natural stone varies in porosity and reaction.
How do I prep the surface before sealing?
The surface must be clean and completely dry. A pre-seal paver cleaner like Techniseal HD Paver Prep is recommended to remove efflorescence, dirt, and contaminants for maximum sealer adhesion.
Is it safe on colored and stamped concrete?
Yes — SB-9000 is ideal for stamped and colored concrete, where the wet-look finish dramatically enhances pattern and color depth. Always test first.
Transform tired pavers into a showpiece. Order SEK Surebond SB-9000 Wet Look Sealer — 1 Gallon today and seal your hardscape the way the pros do.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
SEK Surebond – SB-9000 Wet Look Solvent Based Sealer- Gallon
SEK Surebond – SB-9000 Wet Look Solvent Based Sealer- Gallon
Premium Wet-Look Gloss Sealer for Pavers, Stamped Concrete & Natural Stone
Bring tired pavers back to life and lock in that rich, just-rained-on look with SEK Surebond SB-9000 Wet Look Solvent-Based Sealer — a premium, high-solids acrylic paver sealer engineered to deeply enhance surface color, deliver a glossy wet-look finish, and protect your hardscape from the elements for years. This 1-gallon container is the go-to sealer for hardscape contractors and homeowners who want professional results, maximum color enhancement, and long-term surface protection.
Whether you're sealing a brand-new paver patio, restoring the elegance of a weathered driveway, or protecting a stamped concrete pool deck, SB-9000 transforms the surface with a luxurious wet sheen while creating a durable barrier against salt, stains, UV, and weathering.
Why Pros Choose SEK Surebond SB-9000
Cheap sealers yellow in the sun, trap moisture, and peel within a season. SB-9000 is engineered differently — a high-solids solvent-based acrylic co-polymer formula that stays clear, resists UV yellowing, and remains breathable so naturally occurring moisture and efflorescence can escape rather than becoming trapped beneath the film. That means a deeper color boost, a longer-lasting finish, and a sealer you can apply immediately after paver installation without fear of cloudy hazing.
Key Features & Benefits
- Rich wet-look gloss finish — deeply enhances paver and stone color
- Solvent-based high-solids acrylic — premium professional formulation
- Non-yellowing — UV-resistant, stays clear under sunlight
- Breathable — won't trap moisture or efflorescence beneath the film
- Can be applied immediately after installation — no long wait times on new pavers
- Stain resistant — makes cleaning and maintenance easier
- Resists salt, mild acid, and alkali — stands up to corrosive chemicals
- Mold & mildew resistant
- Freeze resistant to -60°F and stable up to 180°F once cured
- Restores old, tired pavers to their original rich appearance
- Works on horizontal and vertical surfaces — patios, walls, columns, and more
Ideal Surfaces
- Concrete pavers & interlocking concrete pavers
- Clay pavers
- Flat concrete & stamped concrete
- Exposed aggregate
- Stucco, concrete walls & retaining walls
- Limestone, sandstone & natural paving stones
- Masonry surfaces
Perfect For These Applications
Paver patios, paver driveways, paver walkways, pool decks and pool surrounds, stamped concrete patios, outdoor kitchens, courtyards, garden paths, retaining walls, column cladding, commercial hardscape installations, and any outdoor concrete, masonry, or natural stone surface where a rich wet-look finish is desired.
Product Specifications
- Manufacturer: SEK Surebond
- Product: SB-9000 Wet Look Sealer
- Type: Solvent-based high-solids acrylic co-polymer
- Finish: Wet look, gloss / semi-gloss
- Size: 1 Gallon
- Application: Spray & backroll (2-coat system recommended)
- Coverage: Approx. 100–200 sq. ft. per gallon (varies by surface porosity)
- Use: Exterior only
- Temperature Tolerance (cured): -60°F to 180°F
Quick Application Overview
- Clean and fully dry the surface — remove all dirt, efflorescence, and contaminants (HD Paver Prep recommended for best results).
- Ensure joint sand is dry and fully swept into place if using polymeric or stabilizing sand.
- Protect surrounding landscaping, grass, plants, and metal fixtures.
- Apply the first coat evenly using the spray & backroll method.
- Allow the first coat to dry per manufacturer instructions.
- Apply a second coat for maximum wet-look enhancement and protection.
- Allow sealer to fully cure before foot or vehicle traffic.
Important Notes
- Outdoor use only — not for interior application
- Always test first on a small, inconspicuous area to confirm appearance and compatibility
- Pavers and joint sand must be completely dry before sealing — trapped moisture causes hazing
- Due to the natural variability of stone and clay products, long-term performance may vary
- Wear appropriate PPE — gloves, eye protection, and a respirator rated for solvents
- Keep away from flames and sparks — solvent-based product
Frequently Asked Questions
Will SB-9000 yellow in the sun?
No. SB-9000 is engineered with UV-resistant, non-yellowing acrylic co-polymers specifically to maintain clarity under sun exposure.
Can I apply it to newly installed pavers?
Yes. Because SB-9000 is breathable, it can be applied immediately after installation without trapping naturally occurring moisture or efflorescence.
How much area does 1 gallon cover?
Approximately 100–200 sq. ft. per gallon depending on surface porosity and number of coats. Porous or textured surfaces absorb more product.
One coat or two?
SB-9000 can be applied as a one-coat system, but a two-coat application is recommended for maximum wet-look enhancement, gloss, and protection.
Does it work on natural stone?
Yes — SB-9000 is compatible with limestone, sandstone, and natural paving stones. Always test a small area first, as natural stone varies in porosity and reaction.
How do I prep the surface before sealing?
The surface must be clean and completely dry. A pre-seal paver cleaner like Techniseal HD Paver Prep is recommended to remove efflorescence, dirt, and contaminants for maximum sealer adhesion.
Is it safe on colored and stamped concrete?
Yes — SB-9000 is ideal for stamped and colored concrete, where the wet-look finish dramatically enhances pattern and color depth. Always test first.
Transform tired pavers into a showpiece. Order SEK Surebond SB-9000 Wet Look Sealer — 1 Gallon today and seal your hardscape the way the pros do.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Premium Wet-Look Gloss Sealer for Pavers, Stamped Concrete & Natural Stone
Bring tired pavers back to life and lock in that rich, just-rained-on look with SEK Surebond SB-9000 Wet Look Solvent-Based Sealer — a premium, high-solids acrylic paver sealer engineered to deeply enhance surface color, deliver a glossy wet-look finish, and protect your hardscape from the elements for years. This 1-gallon container is the go-to sealer for hardscape contractors and homeowners who want professional results, maximum color enhancement, and long-term surface protection.
Whether you're sealing a brand-new paver patio, restoring the elegance of a weathered driveway, or protecting a stamped concrete pool deck, SB-9000 transforms the surface with a luxurious wet sheen while creating a durable barrier against salt, stains, UV, and weathering.
Why Pros Choose SEK Surebond SB-9000
Cheap sealers yellow in the sun, trap moisture, and peel within a season. SB-9000 is engineered differently — a high-solids solvent-based acrylic co-polymer formula that stays clear, resists UV yellowing, and remains breathable so naturally occurring moisture and efflorescence can escape rather than becoming trapped beneath the film. That means a deeper color boost, a longer-lasting finish, and a sealer you can apply immediately after paver installation without fear of cloudy hazing.
Key Features & Benefits
- Rich wet-look gloss finish — deeply enhances paver and stone color
- Solvent-based high-solids acrylic — premium professional formulation
- Non-yellowing — UV-resistant, stays clear under sunlight
- Breathable — won't trap moisture or efflorescence beneath the film
- Can be applied immediately after installation — no long wait times on new pavers
- Stain resistant — makes cleaning and maintenance easier
- Resists salt, mild acid, and alkali — stands up to corrosive chemicals
- Mold & mildew resistant
- Freeze resistant to -60°F and stable up to 180°F once cured
- Restores old, tired pavers to their original rich appearance
- Works on horizontal and vertical surfaces — patios, walls, columns, and more
Ideal Surfaces
- Concrete pavers & interlocking concrete pavers
- Clay pavers
- Flat concrete & stamped concrete
- Exposed aggregate
- Stucco, concrete walls & retaining walls
- Limestone, sandstone & natural paving stones
- Masonry surfaces
Perfect For These Applications
Paver patios, paver driveways, paver walkways, pool decks and pool surrounds, stamped concrete patios, outdoor kitchens, courtyards, garden paths, retaining walls, column cladding, commercial hardscape installations, and any outdoor concrete, masonry, or natural stone surface where a rich wet-look finish is desired.
Product Specifications
- Manufacturer: SEK Surebond
- Product: SB-9000 Wet Look Sealer
- Type: Solvent-based high-solids acrylic co-polymer
- Finish: Wet look, gloss / semi-gloss
- Size: 1 Gallon
- Application: Spray & backroll (2-coat system recommended)
- Coverage: Approx. 100–200 sq. ft. per gallon (varies by surface porosity)
- Use: Exterior only
- Temperature Tolerance (cured): -60°F to 180°F
Quick Application Overview
- Clean and fully dry the surface — remove all dirt, efflorescence, and contaminants (HD Paver Prep recommended for best results).
- Ensure joint sand is dry and fully swept into place if using polymeric or stabilizing sand.
- Protect surrounding landscaping, grass, plants, and metal fixtures.
- Apply the first coat evenly using the spray & backroll method.
- Allow the first coat to dry per manufacturer instructions.
- Apply a second coat for maximum wet-look enhancement and protection.
- Allow sealer to fully cure before foot or vehicle traffic.
Important Notes
- Outdoor use only — not for interior application
- Always test first on a small, inconspicuous area to confirm appearance and compatibility
- Pavers and joint sand must be completely dry before sealing — trapped moisture causes hazing
- Due to the natural variability of stone and clay products, long-term performance may vary
- Wear appropriate PPE — gloves, eye protection, and a respirator rated for solvents
- Keep away from flames and sparks — solvent-based product
Frequently Asked Questions
Will SB-9000 yellow in the sun?
No. SB-9000 is engineered with UV-resistant, non-yellowing acrylic co-polymers specifically to maintain clarity under sun exposure.
Can I apply it to newly installed pavers?
Yes. Because SB-9000 is breathable, it can be applied immediately after installation without trapping naturally occurring moisture or efflorescence.
How much area does 1 gallon cover?
Approximately 100–200 sq. ft. per gallon depending on surface porosity and number of coats. Porous or textured surfaces absorb more product.
One coat or two?
SB-9000 can be applied as a one-coat system, but a two-coat application is recommended for maximum wet-look enhancement, gloss, and protection.
Does it work on natural stone?
Yes — SB-9000 is compatible with limestone, sandstone, and natural paving stones. Always test a small area first, as natural stone varies in porosity and reaction.
How do I prep the surface before sealing?
The surface must be clean and completely dry. A pre-seal paver cleaner like Techniseal HD Paver Prep is recommended to remove efflorescence, dirt, and contaminants for maximum sealer adhesion.
Is it safe on colored and stamped concrete?
Yes — SB-9000 is ideal for stamped and colored concrete, where the wet-look finish dramatically enhances pattern and color depth. Always test first.
Transform tired pavers into a showpiece. Order SEK Surebond SB-9000 Wet Look Sealer — 1 Gallon today and seal your hardscape the way the pros do.
