Powerful Oil & Grease Spot Cleaner for Pavers, Concrete & Stone

Get oil, grease, and petroleum stains out of your hardscape the right way with SEK Surebond Oil Extractor — a powerful, alkaline-solvent based spot cleaner engineered to dissolve, encapsulate, and lift motor oil, transmission fluid, hydraulic oil, cooking oil, grease, and food-based oil stains from pavers, concrete, and masonry surfaces. This 1-quart bottle is the go-to oil stain remover for hardscape contractors and homeowners who want professional results without the harsh acids.

Whether you're rescuing a paver driveway from a motor oil leak, cleaning grease splatter off an outdoor kitchen, or removing hydraulic fluid from a commercial walkway, Oil Extractor breaks the bond between the oil and the substrate — then rinses clean with water.

Why Pros Choose SEK Surebond Oil Extractor

Household degreasers don't penetrate hardscape surfaces. Harsh acid cleaners etch and discolor pavers. Oil Extractor solves both problems with an advanced biodegradable, phosphate-free alkaline-solvent formula that dissolves oil and grease deep within the paver pores, encapsulates it, and releases it with a simple water rinse. Its Clean Rinse Technology means no sticky residue, no surface haze, and no environmental headaches — just clean, restored pavers.

Key Features & Benefits

• Dissolves petroleum & food-based oil and grease stains — motor oil, cooking oil, grease, and more
• Ready-to-use formula — no mixing, no dilution, no guesswork
• Biodegradable & phosphate-free — environmentally friendly replacement for harsh acid cleaners
• Clean Rinse Technology — oil and residue rinse away cleanly with water
• Alkaline formula — helps neutralize acid-based detergents and cleaners
• Compatible with all Surebond sealers (with proper dwell time and application)
• Works on horizontal and vertical surfaces
• Safe on old and new surfaces in outdoor environments
• Professional contractor grade — trusted by hardscape pros
• Convenient 1-quart size — perfect for spot treatments and targeted stain removal

Removes These Stains

• Motor oil, transmission fluid, and hydraulic oil
• Gasoline and diesel drips
• Cooking oil and grease splatter
• Food-based oil stains (mayonnaise, salad dressing, butter)
• Engine grease and lubricants
• General petroleum-based stains

Works on These Surfaces

• Concrete pavers & interlocking concrete pavers
• Clay pavers
• Flat concrete
• Masonry & concrete block
• Natural stone
• Segmental retaining wall blocks
• Concrete walls & exposed aggregate
• Tile, terrazzo, and stucco

Coverage Chart

Coverage is based on a single treatment. Coverage may vary depending on surface porosity, texture, severity of staining, application method, and site conditions.

Container Size	Coverage per Treatment	Best For
1 Quart	25 – 60 sq. ft.	Spot stains & targeted cleaning
5 Gallon Pail	500 – 1,200 sq. ft.	Large driveways & commercial jobs

Tip: Heavy, aged, or deep-set oil stains may require a secondary cleaning and extended dwell time.

Product Specifications

• Manufacturer: SEK Surebond
• Product: Oil Extractor
• Type: Alkaline-solvent based, ready-to-use oil spot cleaner
• Size: 1 Quart
• Dilution: None — apply undiluted (straight)
• Use: Exterior only
• Appearance: Colorless alkaline emulsion containing petroleum distillates

Quick Application Overview

1. Sweep and remove all loose soil and debris from the surface.
2. Protect adjacent surfaces, landscaping, plants, and metal fixtures.
3. Test first in a small, inconspicuous area to confirm suitability and dwell time.
4. Shake or stir the tightly covered container before each use.
5. Pour Oil Extractor undiluted (straight) onto the stain, brushing to fully cover.
6. Allow the cleaner to dwell for 20–30 minutes.
7. Scrub the stain with a stiff-bristle brush to agitate and break it down further.
8. Let dwell for another 20–30 minutes. Lightly re-apply if the surface begins to dry.
9. Rinse thoroughly with a pressure washer or garden hose. Hot water works best.
10. Let the surface dry, then inspect. Repeat for deep-set or aged stains.
11. For heavy stains, use the poultice method with white cloth or paper towels saturated in Oil Extractor placed over the stain.

Important Notes

• Outdoor use only in properly ventilated conditions
• Best results when air and surface temperatures are 40°F or above
• Do not clean when temperatures are below freezing or will drop below freezing overnight
• If air temperature exceeds 90°F, flash-cool the surface with water before applying — do not allow product to dry on a hot surface
• Not for use on asphalt
• Use caution on sensitive surfaces such as wet-cast pavers, manufactured stone, and stamped concrete — may affect surface color (test first)
• Excessive pressure-washer pressure can damage substrate — use only what's needed
• Wear appropriate PPE — gloves, eye protection, and skin protection
• Keep away from flames and sparks — contains petroleum distillates

Frequently Asked Questions

Do I need to dilute Oil Extractor?
No. Oil Extractor is ready-to-use and should be applied undiluted (straight) onto the stain for best results.

Will it remove old, dried motor oil stains?
Yes — though aged, heavy, or deep-set oil stains may require a secondary cleaning and extended dwell time. The poultice method (saturated cloth placed over the stain) works especially well on older stains.

Is it safe on sealed pavers?
Yes — Oil Extractor is compatible with all Surebond sealers when used with proper dwell time and application. Always test a small area first.

How much area does 1 quart cover?
Approximately 25–60 sq. ft. per quart for a single spot treatment, depending on surface porosity and stain severity.

Can I use this on stamped or colored concrete?
Use caution — Oil Extractor may affect the color of sensitive surfaces like wet-cast pavers, manufactured stone, and stamped concrete. Always test in an inconspicuous area first.

Do I need a pressure washer?
No — a garden hose with a nozzle works fine for rinsing. A hot water pressure washer will break down tough oil stains faster, but avoid excessive pressure that could damage the substrate.

Is it environmentally safe?
Oil Extractor uses a biodegradable, phosphate-free formula that safely replaces many harsh acid-based cleaners. Always follow label directions and protect nearby plants and grass during application.

What's the difference between Oil Extractor and S.R.B. Stain & Rust Buster?
Oil Extractor is specifically formulated for oil, grease, and petroleum-based stains. S.R.B. targets organic, non-greasy stains like rust, moss, mildew, leaf, blood, and beverage spills. Use them together to cover the full spectrum of hardscape stains.

Beat oil stains before they beat your driveway. Order SEK Surebond Oil Extractor — 1 Quart today and restore your hardscape with professional cleaning power.

View Official Technical Data Sheet (PDF)